Mila 4500 Copy Gearbox Latch Only - Single Spindle

Mila
BackSet: 35mm
Hole Centres: 92mm
Case Height: 233mm
Case Width: 50mm
Single Spindle gearbox.

Product Information

This Mila Lockcase with a Latch Only has a 35mm backset, 92mm centres and an 8mm single spindle. The 4500 series features different positioned connectors to the MILACASE35LATCH Latch (adjacent). M4 x 10mm self tapping machine screws need to be used with this lock as screw holes are unthreaded. Self tapping screws are required (not supplied).

Operation: Lever lever (L/L)

Latch reversal: Undo the screw in the side of the lock case to remove the latch, reverse, reinsert and replace the screw.

Click here to check if connectors occur in the same place, if not you will have to make adjustment.